Additional information

Fabrics and characteristics

• Highly waterproof (20K mm) and breathable (10K g/m2/24h) 2-layer Toray Dermizax® membrane.
• Insulated with Valtherm® White Bear 80 g/m2.
• SAB® heat-sealed zippers.
• Side zippers with double sliders for ventilation.
• Detachable hood.
• 3-point waist adjustment.
• 3D honeycomb panel
• Ski pass pocket
• Stiffness arch inserted into the hood flap
• Padded collar and neck
• Laser-perforated ventilation at the neck

Care and cleaning

Ski garments are complex due to the variety of materials they incorporate, but most importantly because of the outer fabric—the part we see and that gives the garment its color. This fabric contains a membrane which, if of high quality, ensures the garment is waterproof while allowing sweat to escape. Some garments also feature a DWR (Durable Water Repellent) treatment. All Reforcer garments include this treatment.

Washing tips (only if necessary):

• Hand wash is preferred. If using a washing machine, select a short cycle

• Washing temperature should not exceed 30ºC; cold water is ideal

• Use neutral, liquid soap (Marseille soap works well) and avoid excess

• Do not use fabric softener

• Do not spin-dry, wring, or stretch the garment

• Avoid bleach, even those suitable for colored clothes

• Dry flat on a drying rack

• Do not place near direct heat sources (fireplace, radiator, hairdryer, etc.)

• The best drying method is in a warm room for gentle and even drying

Spot cleaning (for light or localized dirt):

• Wipe with a clean, damp cloth and a small amount of soap; avoid rubbing excessively.

• Remove residue with a second clean, dry cloth.

• Allow the garment to air dry.

If you have any questions, contact info@reforcer.com