Tejido y características

• Toray Dermizax® EV 4Way Stretch membrane with high breathability (20 K g/m2/24h) and high impermeability (20 K mm)
• Insulated with Valtherm® White Bear in 100 g/m2
• Removable hood with 3 adjustment points.
• Arch of rigidity insert in the flap of the hood.
• Ventilation on the neck with laser perforation
• Padded collar and nape
• Heat-sealed zippers on pockets
• Side zippers for ventilation.
• Silicone handles and buttons.
• – Glasses cleaner with extender from internal pocket.
• Two interior mask pockets
• Inside pocket for mobile.
• Waist tightening at 2 points.
• Sleeve with thumb loop
• Standard pattern
• Ski pass pocket

Care and cleaning

Ski garments are complex due to the number of different materials that make them up, but mainly because of the outer fabric, which is what we see and what gives the garment its color. This fabric has a membrane inside which, if it is of high quality, will make the garment waterproof while also allowing sweat to escape. In addition, in some cases, it will have a DWR (Durable Water Repellent) treatment. Reforcer garments include this treatment.

Washing tips (only if really necessary):

• Hand wash preferably. If using a washing machine, choose a short cycle
• Washing temperature: not higher than 30ºC. Cold water is most suitable
• Use neutral (pH) and liquid soap (Marseille soap works well), and not in excess
• Do not use any type of fabric softener
• Do not spin-dry
• Do not wring or stretch
• Do not use bleach, even those suitable for colored clothes
• Dry the garment flat on a drying rack
• Do not dry near heat sources: fireplace, radiator, hairdryer…
• The best drying method is in a warm room. That way it doesn’t take too long
•  

Cleaning tips (when dirt is localized and light):

• Clean with a clean, damp cloth and a little soap. Do not rub excessively
• Remove dirt with another clean, dry cloth
• Let it dry

If in doubt, contact info@reforcer.com